Want a Closer Look?
Click on the links below to view individual E-Series Soft-Mount High-Performance Commercial Washer-Extractor models & their specifications.
- EH020 - 20-pound Capacity Washer
- EH030 - 30-pound Capacity Washer
- EH040 - 40-pound Capacity Washer
- EH055 - 55-pound Capacity Washer
- EH090 - 90-pound Capacity Washer
- EH130 - 130-pound Capacity Washer
- EH255 - 255-pound Capacity Washer
Resources
On-Premise Commercial Washer-Extractors
- E-Series Soft-Mount High-Performance Commercial Washer-Extractors
- MG-Series Hard-Mount High-Performance Commercial
Washer-Extractors
- M-Series Hard-Mount Front-Load Commercial Washer-Extractors
- L-Series Hard-Mount Commercial
Washer-Extractors
- Econ-O-Wash Top-Load
Commercial Washers
Customer Testimonials
Click on the links below to view articles about a few of our customers' installations.
View all on-premise washers.
Go to on-premise dryers page.
E-Series EH040 Washer-Extractor for On-Premise Laundries
E-Series 40-pound capacity high-performance washer-extractor.
Product Specifications
- Capacity 40 lbs (17.3 kg)
- Cylinder Diameter 27.6 inch (700 mm)
- Cylinder Depth 17.7 inch (450 mm)
- Cylinder Volume 6.1 cu ft (173 dm3)
- Net Weight 1049 lbs (476 kg)
- Crated Weight 1091 lbs (495 kg)
- Machine Dimensions (WxDxH) 34.2 x 37.9 x 55.3 inch
(868 x 962 x 1404 mm)
- Door Opening 16.8 inch (426 mm)
- Floor to Door 20.3 inch (515 mm)
- Shipping Dimensions (WxDxH) 35.3 x 40 x 61.6 inch
(897 x 1017 x 1565 mm)
- Washing Speeds
Logi Control 44
Intelli Control 25/34/40/44
- Spin Speeds 44/100/351/550/750/950 rpm
- G-Force 0.75/4/48/119/221/354
- Modified Energy Factor (MEF)* 1.96
- Water Consumption Factor (WCF)* 5.04
- Static Force Transmitted 1237 lbs (561 kg)
- Dynamic Force Transmitted 212 lbs (96 kg)
- Frequency of the Dynamic Force 15.8 Hz
- Drain Diameter (gravity drain) 3 inch (76 mm)
- Water Inlets (2) 3/4 inch (19 mm)
- Water Pressure 30-60 PSI (2-4 bar)
- Water Flow 16 gal/min (60 l/min)
- Steam Connection 1/2 inch (12.7 mm)
- Steam Pressure 29-87 PSI (2-6 bar)
- Steam Flow 176 lbs/h (80 kg/h)
- Motor Power 1.6 kW
- Electric Heating Power (optional)
Single Phase 10.6 kW
Three Phase 15.6 kW
* Modified Energy Factor (MEF) measured in cubic feet per kilowatt-hour per cycle. Water Consumption Factor (WCF) measured in gallons per cycle per cubic feet. MEF and WCF statistics are according to DOE test results report by Intertek, an independent testing laboratory, dated February 27, 2007.
** Specifications subject to change without notice or obligation. Contact Continental Girbau for dimensions not shown or for clarification.