Want a Closer Look?
Click on the links below to view individual M-Series Commercial Washer models and their specifications!
- EM025 - 25-pound Capacity Washer
- EM040 - 40-pound Capacity Washer
- EM055 - 55-pound Capacity Washer
Resources
Card- & Coin-Operated Washers
- ExpressWash Soft-Mount High-Performance Commercial
Washer-Extractors
- MG-Series Hard-Mount High-
Performance Commercial
Washer-Extractors
- M-Series Hard-Mount Front-Load Commercial Washer-Extractors
- L-Series Hard-Mount Commercial Washer-Extractors
- Econ-O-Wash Top-Load
Commercial Washers
Customer Testimonials
Click on the links below to view articles about our customers.
Go back to vended washers page.
Go to vended dryers page.
EM025 Card- or Coin-Operated Commercial
Washer-Extractor
The 25-pound capacity M-Series hard-mount washer-extractor.
Product Specifications
- Capacity 25 lbs (11 kg)
- Cylinder Diameter 21.1 inch (536 mm)
- Cylinder Depth 17.3 inch (439 mm)
- Cylinder Volume 3.5 cu ft (99 dm3)
- Net Weight 317 lbs (144 kg)
- Crated Weight 342 lbs (155 kg)
- Machine Dimensions (WxDxH) 27 x 29.9 x 42.5 inch
(685 x 760 x 1080 mm)
- Door Opening 12.7 inch (322 mm)
- Floor to Door 15.4 inch (390 mm)
- Shipping Dimensions (WxDxH) 27.8 x 32.7 x 49.2 inch
(707 x 830 x 1250 mm)
- Washing Speed 50 rpm
- Spin Speeds 50/100/300/400/500/600 rpm
- G-Force 0.75/3/27/48/75/119.3
- Static Force Transmitted 428 lbs (194 kg)
- Dynamic Force Transmitted 514 lbs (233 kg)
- Available Voltages/Amp/Wire Config.
Hot Water 120/60/1
15 Amp/3-prong cord
- Drain Diameter 2 inch (51 mm)
- Water Inlets (2) 3/4 inch (19 mm)
- Recommended Water Pressure 30-60 PSI (2-4 bar)
- Water Flow 8 gal/min. (30 l/min.)
- Motor Power 0.35 kW
- Modified Energy Factor (MEF)1.53
- Water Consumption Factor (WCF)5.68
* Modified Energy Factor (MEF) measured in cubic feet per kilowatt-hour per cycle. Water Consumption Factor (WCF) measured in gallons per cycle per cubic feet. MEF and WCF statistics are according to DOE test results report by Intertek, an independent testing laboratory, dated February 29, 2008.
** Specifications subject to change without notice or obligation. Contact Continental Girbau for dimensions not shown or for clarification.